Pendlefinance liquidity pools in V2 give depositors LP shares that can earn yield before market maturity
Pendlefinance liquidity pools are V2 markets where depositors receive liquidity provider (LP) tokens representing a share of Principal Tokens (PT) and Standardized Yield (SY). That share can earn PT's fixed yield, SY's underlying yield, swap fees, and available PENDLE incentives. Your first deposit requires a chosen market, a future maturity date, and an acceptable quote for LP output. After the deposit transaction confirms successfully, your wallet holds LP tokens for that market; approving an input token alone doesn't add liquidity.
last updated
The market and balance needed for a first deposit
An active market with remaining time before maturity is the starting point for earning new LP returns. The pool's asset, maturity date, and supported deposit inputs define the position.
Check the connected wallet and network against the selected pool before reviewing its deposit quote. You'll need the chosen input balance and network gas for the transactions involved. The same underlying asset can have separate markets for different maturities, so matching the asset name alone isn't enough. Each market has its own liquidity and implied yield. Its LP tokens identify ownership in that specific pool. These are V2 liquidity positions; Boros funding-rate margin requirements describe a different product.
PT, SY, and the pool share you receive
PT and SY make up the pool's holdings, while an LP token represents ownership of a portion of that combined position. Understanding those parts explains why a deposit can produce several kinds of income without giving each depositor a fixed overall return.
The assets inside the pool
PT carries the principal claim
PT gives the pool a principal claim redeemable after its maturity date. The accounting asset in brackets in the market name determines the redemption unit. A discounted PT can appreciate toward that value as maturity approaches, subject to the underlying asset's redemption conditions. This establishes the fixed-yield component of the pool. PT doesn't earn the underlying asset's variable yield or points, and an early sale uses the available market price.
SY holds the yield-bearing asset
SY wraps the underlying yield-bearing asset and gives V2 contracts a common interface for its yield mechanism. The application can handle supported wrapping and unwrapping within its routes. SY itself has no maturity date. Its conversion ratio isn't universally one underlying token per SY, so token counts alone don't establish the deposited value. The wrapper holds the asset that generates the variable yield, rewards, and any applicable partner points.
LP tracks ownership of both components
Your LP tokens represent a share of the pool, whose PT and SY proportions change as trading occurs. An LP balance therefore doesn't describe a separate purchase of each token at a permanently fixed ratio. Yield Tokens (YT) represent yield until maturity, and the pool supports their trading without holding YT as a reserve asset. Any YT retained during a deposit remains separate from the LP share and has its own expiry behavior.
What earns yield inside a PT/SY pool?
An LP position earns from its PT and SY holdings, pool trading fees, and any incentives available to that market. These components follow different drivers. The PT contribution reflects its purchase value and maturity redemption conditions. SY follows the underlying protocol's actual yield. Trading activity generates fee income, while incentive programs determine additional token rewards. Combining them doesn't make the entire LP annual percentage yield (APY) fixed. Changing activity or incentives can alter the total even while the PT portion approaches maturity.
The V2 LP fee calculation allocates 20% of explicit swap fees and all implicit swap fees to LP holders. An individual holder receives a share of that pool income. Fee income changes with trading, so an annualized estimate isn't a promise of future volume. Swap charges also depend on the market's fee tier and remaining time to maturity. A longer remaining term increases the fee for the same tier.
Partner points belong to the SY portion of an LP position; its PT portion doesn't earn them. Because swaps change the composition, a larger total LP value doesn't necessarily mean proportionally greater points exposure. The underlying APY display generally annualizes recent yield using a seven-day window, with asset-specific exceptions. It describes recent earnings, while implied APY expresses the market's pricing of future yield. Neither makes partner points equivalent to cash.
Pendlefinance liquidity pools: First LP deposit
- PT, SY, and the pool share you receive
- What earns yield inside a PT/SY pool?
- Trading changes the pool's mix and exit value
Trading changes the pool's mix and exit value
The V2 automated market maker (AMM) concentrates liquidity within a configured implied-yield range and adjusts its curve as maturity approaches. PT trades against SY directly, while YT trades use flash swaps through that same pool. Both kinds of trading can generate LP fees. As orders alter the reserve mix, the value of your share responds to the relative value of PT and SY. If implied APY exceeds the pool's upper yield boundary, market buys of YT, market sales of PT, and Zap Out can become unavailable. The range concentrates liquidity; it doesn't provide unlimited depth for every trade.
Reviewing the quote before your first liquidity deposit
When seeding a new pool with its initial liquidity, Keep YT Mode is required. Otherwise, choose between LP output alone and an LP position with separate YT before committing your input. A regular Zap In can swap to obtain PT for liquidity. Keep YT Mode instead mints matching PT and YT from part of the SY, pairs PT with the remaining SY, and returns YT to your wallet. That avoids the PT/SY swap used to build the deposit. Converting the starting token can still carry price impact. Some capital remains in YT, which can earn yield until maturity and has zero value at expiry.
Review the proposed deposit against these conditions before authorizing it:
Pendlefinance liquidity pools: First LP deposit
- PT, SY, and the pool share you receive
- What earns yield inside a PT/SY pool?
- Trading changes the pool's mix and exit value
- Reviewing the quote before your first liquidity deposit
- The selected V2 pool remains active and has the intended maturity.
- The connected wallet holds the chosen input on the pool's network, plus the gas needed for execution.
- The application finds a conversion route and quotes LP output for that pool.
- The minimum LP output allowed by the slippage tolerance is acceptable, along with the quoted YT output if you use Keep YT Mode.
- The selected entry mode matches whether you intend to retain separate YT; seeding initial liquidity requires Keep YT Mode.
If the form reports “No route found to add liquidity,” stop before submission. The selected input hasn't produced a viable conversion into the required pool assets. An aggregator issue, unavailable trading liquidity, or a network connection problem can cause this failure. Check the wallet connection, then select another supported input and request a fresh quote. If the fresh quote satisfies those conditions, complete any required token approval, then submit the Zap In transaction. After a successful deposit, check the received LP shares against the reviewed output terms for the chosen market. If you used Keep YT Mode, check the separately received YT against the quoted output.
Underlying losses still reach a correlated pool
Under normal redemption conditions, PT's convergence toward the underlying value removes time-dependent impermanent loss at maturity. The AMM's tightening curve mitigates that component before expiry. This protection concerns the relative value of PT and SY; the position still holds exposure to the underlying asset. An exchange rate below the watermark can reduce PT redemption at maturity. The watermark records the highest exchange rate between an interest-bearing token and its accounting asset. Negative yield can lower the current rate beneath that level, affecting the principal claim inside an LP position. Separately retained YT stops earning yield while the exchange rate is below the watermark and can resume only if that rate recovers before maturity.
The SY portion also exposes the position to the underlying protocol's contracts and asset value. Pendle's contract audits don't eliminate failures in those connected systems or fix the asset's dollar price.
Withdrawing before maturity and redeeming afterward
Before maturity, liquidity removal uses the pool's existing holdings, and converting them into a single output token can introduce swap costs. Removing PT and SY directly avoids that additional conversion at withdrawal. It leaves separate assets to manage, including PT that hasn't matured. A single-token Zap Out handles conversions within its route, so the output asset and available liquidity affect the proceeds.
Maturity changes the PT leg from a tradable future principal claim into a redeemable one under its applicable redemption conditions. Existing LP rewards remain claimable. Yield and points generated after an LP position matures go to the protocol's treasury fee wallet. The assets can remain in the SY contract, but leaving them there doesn't extend the holder's earning period. A wrapper without an expiry doesn't make the expired market continue earning for its LP holders.
The matured-pool exit can combine LP removal, PT redemption, SY unwrapping, and any needed output swaps. Redeeming matured PT carries no protocol redemption fee, although network gas and separate swaps can still cost money. Claim All Pool Rewards can bundle reward claiming with Zap Out in a single transaction.
Details worth knowing about Pendlefinance liquidity pools
Must LP tokens be staked to receive basic pool rewards?
LP tokens don't require staking to earn their ordinary share of V2 pool rewards. Holding the LP position is sufficient for those rewards. Legacy LP boosts remain available until maturity only to eligible vePENDLE holders in pools that existed when sPENDLE was announced on January 20, 2026. Available incentives still depend on the particular pool and its underlying asset.
Does the YT points fee also apply to LP points?
LP points don't incur the 5% points fee applied to YT holdings. The LP's point-earning exposure comes from its share of the pool's SY component. If a deposit retains separate YT, the points fee applies to that YT exposure. It doesn't become a fee on the entire LP deposit or its principal.
Who distributes partner points earned by a first LP position?
The partner protocol handles final point allocation and distribution. Pendle supplies balance-tracking tools that account for LP composition and applicable reward shares. The partner uses those results to calculate allocations and display them on its dashboard. Claiming a Pendle pool reward doesn't establish that a separate partner has distributed its points.
How can an LP boost change my share of a pool's points?
The up-to-2.5x LP points boost applies to eligible vePENDLE holders in pools that existed when sPENDLE was announced on January 20, 2026. It lasts only until those pools mature; pools launched afterward aren't eligible. It redistributes the points allocated to the pool's SY component, so boosted positions receive more and non-boosted positions receive comparatively less. It doesn't multiply the pool's total partner-point supply, and it doesn't apply to points earned from separate YT holdings.
Is an LP wrapper required for an ordinary pool deposit?
An ordinary V2 liquidity deposit produces LP tokens without requiring a separate LP wrapper. Wrapping serves certain external money-market collateral integrations. The wrapper represents the underlying LP position on a 1:1 basis and preserves associated rewards. Borrowing against that wrapped position adds the external market's collateral rules, which aren't part of a simple liquidity deposit.
Can a first LP position move directly into another active pool?
Transfer Liquidity supports moving liquidity between active pools in a single transaction. Its LP Only mode covers LP tokens, while All Positions can include PT and YT positions as well. The destination has its own asset and maturity terms. Once the starting pool has matured, Roll Over is the applicable feature instead of the active-pool transfer.
When can I claim LP rewards without removing liquidity?
Earned LP yield and rewards can be claimed from the dashboard before maturity without removing the LP position. A claim concerns accrued, claimable amounts; it doesn't redeem the pool share or guarantee that every partner reward is immediately available. Keeping the position leaves its PT and SY exposure in the pool until you remove it.